Ford Pack Joint CouplingsFor Copper, PET, PEP or PVC
How the Pack Joint Works
- Machined grooves in the clamp provide additional gripping action.
The Ford Quick Joint offers traditional Ford features of quality and reliability. This easy to use fitting is available on a wide variety of Ford products. Just stab the copper or plastic tubing into the fitting and tighten down the compression nut to the external stop. That's it! The Quick Joint provides excellent pullout resistance and superior hydraulic blow-off protection. Note: The Ford Quick Joint Nut is NOT interchangeable with other Compression fittings.For 3/4" - 2" Copper, PET (SDR9) or 3/4" - 1" PEP
The Ford Ultra-Tite compression coupling provides an immediate lock onto Polyethylene Pipe (PEP/IPS) or Polyethylene Tubing (PET/CTS) when inserted to the internal stop.
(No insert required or recommended)
Ultra-Tite couplings on corporation stops are assembled hand tight and must be removed for drilling or tapping machine adaptation to corporation stop outlet thread. Once the tap is made, the Ultra-Tite should be securely tightened to the corporation stop outlet thread.
In extremely cold conditions, Pitorifice Key Corps utilize mainline water flow to help prevent service line freezing. The Pitorifice copper tube opening on the corporation stop inlet, which faces upstream, continuously channels the warmer, faster moving mainline water through a service line loop. The loop channels water from the main, runs inside a basement (with a tee connection for the customer's plumbing) and returns to the main with another Pitorifice Corp copper tube opening that faces downstream.
The Pitorifice option is available on 3/4" and 1" Ford Key Style Corporation Stops. These are non-stock parts. Please call or write for prices and minimum order quantities. Standard lengths are for direct water main taps; longer lengths for saddles are available.
TO ORDER: Add "-P" to any 3/4" or 1" Corp Stop catalog number for Pitorifice option.
Note: The Pitorifice option is for Key Style Corporation Stops only.
Available for YL (shallow) Yokeboxes. Plastic Upper Section uses the same bolts as a standard iron upper section to connect to Yokebox base. Accepts both standard locking or lockless lids. Insert "P" into the catalog number.Example: YLP144-233.
Seal Wire Hole in Inlet Valve. To Order add "-SEAL" to catalog number. Example: LSV11-133W-SEAL
Most valves are available with padlock wings (except for Minneapolis Valve or where noted). Add "W" to catalog number. Example: B11-333W. "W" in a listed catalog number indicates that the valve is available with padlock wings only.
Standard tee-head stops on the body to permit 90° turn only. Full 360° teehead rotation is available. Add "R" to catalog number. Example: B21-333R.
A distinctive tee-head with "Reclaimed Water" lettering for easy identification is available on 3/4" through 2" Ball Valves. Insert "RW" into the catalog number. Example: BRW11-333W. Tee-head sold only with padlock wings.
Adapts tee-head on 1-1/4",1-1/2" and 2" Ball Valves (listed on pages 6 - 13) for operation with standard gate valve wrenches. More Info.
Threads are available around the valve body in order to attach Minneapolis style curb box. 3/4" and 1" valves have 1-1/2" threads; 1-1/4", 1-1/2" and 2" valves have 2" threads. If an additional size is required other than the sizes listed, please contact the factory for availability.
Stop-and-waste valves allow the downstream service line to drain when in the closed position. This feature is typically used to avoid damage to the service line caused by freezing. Valves available with this option are indicated with a double asterisk (**). Add "SW" to the end of the catalog number. Example: B11-333SW.
Available on 3/4", 1", 1-1/2" and 2" CTS Quick Joint Nuts, add "-TW-Q" to end of catalog number.